Taking Care of new Kitchen Flooring | Altamonte Springs Flooring

taking-care-of-new-kitchen-flooring

Most of the people go out of their way to ensure that their kitchens are well kept. It is not so easy for others as they do not know the best ways to take of the different kitchen floors that are offered by companies such as Altamonte Springs Flooring. Such floors include laminate, Vinyl, wood, tiled floors and so on. Taking care of a new kitchen can be very easy as long as you appreciate that there are different ways of cleaning the different types of floors.

Laminate Floors

For laminate floors, you should use a soft bristle broom, vacuum cleaner with suction only or mop to remove loose particulate, dirt or dust. You should do this regularly. For some damp cleaning, you should use a spray of your choice and a terry, cotton cloth or microfiber mop. You should avoid wet –mop cleaning using liquid cleaners or water. You should also use protective coverings on your window to avoid excessive heat and UV rays from direct sunlight that may cause fading. It is also important to rearrange your furniture and rugs to aid in the even aging of your floor. You should avoid exposing your laminate floor to inclement weather.  

Preventing damage to laminate floors 

You can remove any stubborn stains caused by paint, markers tar and oil with the use of acetone-based remover for finger polish. You should always wipe spots and spills immediately. Whenever you are dealing with tough substances such as chewing gum and wax, you can use ice to harden them and later scrape them off using a credit card or plastic scraper.  

Vinyl Floors 

Vinyl is among the most popular floors kitchens that Altamonte Springs Flooring offers. People prefer it to other floors because it is water resistant, durable and can resist stains, scuffs, and dents. It has a stone or wood look. The first step to taking care of vinyl floors is to vacuum or sweep it to ensure that there is nothing on the floor. You should then mop it using vinegar and warm water. Alternatively, you can use cleaners for vinyl floors. A water and dish soap combination is enough to remove stubborn stains if you use a soft towel. Towel off any moisture to allow the floors to dry completely before you can walk on them. Avoid abrasive cleaner as they can damage your floor. 

Caring for Ceramic Floors 

When it comes to floors that require low maintenance, ceramic floors are the best choice for most people who visit Altamonte Springs Flooring. Ceramic tiles are durable and resilient which makes them the best for rooms with high traffic such as kitchens. The first is to vacuum or sweep them once every week to remove any debris or grit that may have accumulated in the kitchen. Use a mild cleaner and warm water to remove any spills or dirt. Once you have finished mopping, you should allow the floor to dry completely before you can start cooking in it again.

Marble Floors 

Marble floors scratch easily if you do not maintain them properly. To keep its beauty, you should clean it properly. For light cleaning, you should use dust mops for sweeping out the debris and dirt. Be careful when using when using vacuums as their wheel can scratch the surfaces. Never use any metal attachments. Use pH neutral soap and wet mop for a deeper cleaner. You should never use harsh cleaners as acidic substances will corrode your marble floors. Never let any spills to sit to avoid staining. Use a doormat to prevent dirt from getting into the house. 

Wooden Floors 

After installation, you should not let anyone walk on the kitchen floors for about eight to twelve hours. It will take several weeks for the curing in the kitchen to finish so you should be careful to avoid scratches on the floor. Avoid using area rugs for about 30 days. At the same time, you should not let your pets on the new floor. If you notice any shrinking of the wooden floor sue to moisture, you can use a humidifier to minimize the cracks. When it comes to cleaning, you vacuum or sweep the floor to prevent any sand particles or abrasive dust form accumulating and scratching the finish. You can mop the floor using vinegar and plain water in a ratio of 1:10. No wax cleaners can be helpful as well.